Blackburn BLITZ 360 Light Set

Blackburn's Grid Side Beacon is designed to work in harmony with front and rear lights, ensuring you're visible from every angle. Pair these side lights with our top - selling Dayblazer 550 front light and Dayblazer 65 rear light, and you get the Luminate 360, the most attention - grabbing light set in our range. **Key Features:** - **Recharge Type**: Micro - USB rechargeable. It charges via any standard USB port, and the charging cable is included. - **Brightness**: The front light can reach up to 550 lumens, the rear up to 65 lumens, and the side up to 85 lumens. - **Battery Type**: Lithium Polymer. - **Recharge Time**: 3 - hour recharge for the front light and 2 - hour recharge for the rear light. - **Mounting Options**: The swivel mount allows you to rotate the light and center it on the road. This flexible silicone mount fits handlebars from 22–35mm and can be used on some helmets. The rear light has a versatile mounting system. You can attach it to round seat posts, aero posts, seat stays, or loops on bags or clothes using the built - in wire clip. - **Product Weight**: 165 grams in total (59g for the front and 48g for the rear). **Run Time:** - Front light - Blitz mode: 1 hour at 550 lumens. - Front light - High mode: 1.5 hours at 275 lumens. - Front light - Low mode: 5 hours at 75 lumens. - Front light - Pulse mode: 5.5 hours at 100 lumens. - Front light - Strobe mode: 12 hours at 65 lumens. - Rear light - Solid mode: 1 hour at 50 lumens. - Rear light - High flash/Strobe mode: 3 hours at 65 lumens. - Rear light - Low flash/Strobe mode: 6 hours at 35 lumens. - Side light - High solid mode: 1.5 hours at 85 lumens. **Water Resistance**: This light is IP - 65 submersible. It's completely protected against dust and can withstand low - pressure water jets from any direction.

Using your Blackburn BLITZ 360 Light Set is a breeze. First, mount the lights. For the front light, use the swivel mount on your handlebars. Make sure it's centered on the road for the best illumination. The silicone mount is flexible, so it can fit handlebars from 22–35mm wide, and you can even use it on some helmets. For the rear light, you have lots of options. You can attach it to round seat posts, aero posts, seat stays, or loops on your bags or clothes using the built - in wire clip. When it's time to charge, just plug the lights into any standard USB port using the included charging cable. The front light takes about 3 hours to recharge, and the rear light takes around 2 hours. As for using different modes, you can choose the brightness and flashing pattern that suits your needs. For example, use the Blitz mode on the front light when you need maximum brightness for a short time. Some things to keep in mind: Don't expose the lights to high - pressure water or submerge them deeper than what the IP - 65 rating allows. If you're not using the lights for a long time, store them in a cool, dry place. And always check the battery level before you head out on your bike. Regularly clean the lights with a soft, dry cloth to keep them in good condition.